Stone Benchtops in Warragul

 Warragul is right on our doorstep. Our workshop is in neighbouring Drouin — around 8 km up the highway. This means Warragul is one of the few places we can template, fabricate and install with almost no travel overhead.

Faster measure-ups, tighter timelines, and a local stonemason you can actually reach. Premier Stone supplies and installs porcelain, natural stone and marble benchtops and surfaces throughout Warragul and the wider Baw Baw region.

Call 1300 282 065 or click below now to get your free quote. 

Premier stone factory transport vehicle

Stone Benchtops and Surfaces for Warragul Homes

Warragul’s a mix of established period homes being renovated, and a steady run of new-build estates going up around town. We do both:

Renovations, replacing tired or (now-banned) engineered stone benchtops in established kitchens, matched to the home.
New builds, working in with your builder and cabinetmaker on new-estate kitchens, laundries and bathrooms.

Whatever the project, the material choice comes down to how you live: porcelain & sintered stone for near-indestructible, low-maintenance surfaces; natural stone & marble for character and a one-of-a-kind benchtop.

See all services →

Why Warragul Renovators Chose Premier Stone

  • We’re local — based minutes away in Drouin, not driving out from Melbourne.
  • Our own fabrication — cut in-house on 5-axis CNC and waterjet machinery, including the specialist tooling porcelain and sintered stone demand. About our workshop →
  • Fixed, fast quotes — itemised and usually back to you within 24 hours.
  • One team, start to finish — we template, fabricate and install; we don’t sub it out. This guarantees the right quality, service, advice and installation times.

How We Work – From Measure to Install

  1. Template once your cabinetry is in, so the fit is exact.
  2. Slab selection & vein-matching using our SlabVision scanner.
  3. Fabrication in our Drouin workshop.
  4. Installation by our own team, coordinated with your trades.
  5. Final check before we leave.

Areas We Service Around Warragul

Warragul, Drouin, Yarragon, Trafalgar, Nilma, Darnum, Buln Buln and the surrounding Baw Baw Shire, Mornington Peninsula, Brighton, Toorak, St Kilda, Seaford and more.

Get a Free Quote For Your Project

Tell us about your kitchen and timeline. We’ll recommend the right material and get an itemised, fixed quote back to you — usually within 24 hours.

Call 1300 282 065 or request your free quote →

Frequently Asked Questions

Q: Do you service Warragul? A: Yes. Our workshop is in neighbouring Drouin, so Warragul is one of our closest service areas — we template, fabricate and install across Warragul and the Baw Baw region.

Q: How far is your workshop from Warragul? A: We’re based in Drouin, about 15 minutes (roughly 10 km) from Warragul, which means quick measure-ups and installs with minimal travel time.

Q: Can you replace an old engineered stone benchtop in my Warragul home? A: Yes. Engineered stone can no longer be supplied or installed in Australia, but we can remove and replace an existing benchtop with porcelain, sintered or natural stone. Removal of old engineered stone is regulated work — talk to us before disturbing it.

Q: Do you work on new-build kitchens in Warragul estates? A: Yes. We coordinate with your builder and cabinetmaker on new-build kitchens, laundries and bathrooms throughout Warragul’s growth areas.

Helping Warragul Homeowner Craft Dream Spaces

Burkhardt 5-axis Water Jet

High precision freeform cutting allowing us to cut intricate curves, undercuts & complex profiles that are either impossible or extremely time consuming and labour intensive when carried out with traditional equipment. They also have a very narrow and clean cutting kerf, allowing tight tolerances and smooth surface finishes.

Taglio Slab Vision, Vertical Slab Scanning System

This system allows us to digitise the slabs of stone to the highest detail. SlabVision uses a high resolution industrial linear camera and LED lighting system in order to render the real colours of the material, each scan captures the attributes of the stones, encompassing colour, thickness quality and size measurements. This allows us to vein match slabs, nest projects with precision to minimise material wastage, and also mark-up and work with areas of interest, such as a crack or pit that can be maintained.

This also allows us to involve the client in the manufacturing journey, providing accurate 3D visual representation of the stone surfaces, showing the vein matching and maximise the visual appeal in line with the clients tastes, such as having particular sections of vein flow of the stone, positioned in areas where is most visible, i.e; centre of a bar front or splashback.

Cobalm CNC Milling Centre

A high speed & precise CNC milling machine that allows us to cut, shape & polish a very large range of complex profiles and shapes from slabs of stone. Our current profiles include all standard square & mitred aris, lambs tongue, bullnose, provincial edge, grooving, drainboards. Other specialist profiles are also available upon request.

Get Your Free, No Obligation Quote

Average quotes are turned around in less than 24 hours. Get in today and see how we compare.

Let’s chat about your project

For more information about any of our services or to book in a quotation please contact us today.

Ph: 1300 282 065
Email: sales@premierstone.com.au

102 Roberts Ct, Drouin VIC 3818

14 + 7 =